Brunnirok Oldenburg Cut-Resistant Jacket - Olive

Cut-resistant jacket in olive, developed as specialised protective clothing intended for people exposed to contact with sharp tools or edges — both in professional environments and during selected outdoor activities. It is suitable for technical work, service tasks, and anywhere there is a risk of accidental cutting of the fabric and blade contact with the body.

The construction is based on an advanced cut-resistant material that combines high mechanical resistance with relatively low weight. The model was developed to provide the highest possible level of protection for critical areas of the upper body, including the neck area. The jacket has been classified as category II personal protective equipment (PPE/ŚOI II).

The inner layer of the jacket is made of an advanced fibre blend:

• Aramid (50%) - responsible for very high mechanical resistance and cut resistance, forming the primary protective component
• polyester (33%) - stabilises the material structure, increases its service durability, and improves resistance to stretching and deformation
• fibreglass (17%) - serves a reinforcing role - its high hardness and resistance to blade action make material penetration more difficult, creating an additional protective barrier

The combination used made it possible to achieve a material with high cut resistance while maintaining low thickness and good flexibility. The outer layer of the jacket is made of a blend of polyester (96%) and elastane (4%). Polyester provides increased durability of the fabric, while elastane improves its stretchability, resulting in a better fit and freedom of movement.

The outer material offers windproof properties and moisture resistance, helping to limit the penetration of light precipitation and protect against chilling caused by wind. The outer layer creates an additional protective barrier, complementing the cut-resistant character of the entire construction.

Every zone of the jacket is lined with cut-resistant material, ensuring continuity of the protective layer across the entire surface. This solution eliminates localised weak points in the construction, so protection is not limited to selected panels only, but covers all areas exposed to contact with sharp edges or tools.

Particular emphasis was placed on protecting sensitive areas. The high stand-up collar is an integral part of the protection system, shielding the neck and throat area. Its design ensures close contact with the body without excessive pressure, so it does not restrict freedom of movement or breathing comfort.

The jacket provides a high level of cut protection, meeting the requirements of European standards for protective clothing. The materials used and the construction ensure effective protection against sharp tools and mechanical hazards:

• cut protection level 5 according to EN 388:2016 - the highest level of resistance to mechanical cuts on a 0-5 scale
• cut protection level D according to EN ISO 13997:1999 - high resistance to cuts from sharp tools at a specified pressure force (scale from the lowest A to the highest F)
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 - meets the requirements for protective clothing and is marked with the CE mark

The Oldenburg model has been classified as category II personal protective equipment (PPE II), which means it is intended to protect against medium-risk hazards. Products in this category are subject to mandatory conformity assessment and EU type examination carried out by a notified body.

The model is equipped with 3 pockets:

• 1 chest pocket
• 2 side pockets

The use of zips increases the security of carried items, while the well-thought-out pocket layout makes it easier to organise equipment conveniently.

The jacket is fastened along its full length with a durable zip, allowing quick and convenient putting on and taking off. The model stands out with a relaxed fit, which does not restrict range of motion and allows comfortable use, including during dynamic work.

The manufacturer recommends washing at a maximum temperature of 30 degrees Celsius, without using bleach, and separately in a protective laundry bag. Do not tumble dry or expose to direct sunlight. Ironing is allowed at temperatures up to 110 degrees Celsius. Dry clean only with tetrachloroethylene solvents.

• cut-resistant jacket
• full-surface protective layer with no uncovered zones
• high stand-up collar protecting the neck and throat
• cut-resistant material: Aramid (50%), polyester (33%), fibreglass (17%)
• outer layer of wind- and moisture-resistant material
• high mechanical resistance while maintaining low weight and flexibility
• protection level 5 according to EN 388:2016
• protection level D according to EN ISO 13997:1999
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 (CE marking)
• relaxed fit ensuring full mobility and comfort
• full-length zip
• 3 practical pockets