Brunnirok Oldenburg Cut-Resistant Jacket - Navy Blue

Cut-resistant jacket in navy blue, developed as specialised protective clothing intended for people exposed to contact with sharp tools or edges — both in professional environments and during selected outdoor activities. It is suitable for technical and service work as well as anywhere there is a risk of accidental cutting of clothing and blade contact with the body.

The construction is based on an advanced cut-resistant material that combines high mechanical resistance with relatively low weight. The model was developed to provide the highest possible level of protection for sensitive areas of the upper body, including the neck area. The jacket has been classified as category II personal protective equipment (PPE).

The inner layer of the jacket is made of an advanced fibre blend:

• Aramid (50%) - responsible for very high mechanical resistance and cut resistance, forming the primary protective component
• polyester (33%) - stabilises the structure of the material, increases its durability in use, and improves resistance to stretching and deformation
• fibreglass (17%) - serves a reinforcing role - high hardness and resistance to blade action make it harder to penetrate the material, creating an additional protective barrier

This combination made it possible to obtain a material with high cut resistance while maintaining low thickness and good flexibility. The outer layer of the jacket is made from a blend of polyester (96%) and elastane (4%). Polyester is responsible for the increased durability of the fabric, while elastane improves its stretch, which translates into a better fit and freedom of movement.

The outer material has windproof properties and resistance to moisture, which limits the penetration of light precipitation and protects against cooling caused by wind. The outer layer creates an additional protective barrier, complementing the cut-resistant properties of the entire construction.

Every zone of the jacket is lined with cut-resistant material, ensuring continuity of the protective layer across the entire surface. This solution eliminates local weak points in the construction, so the protection does not cover only selected panels, but the entirety of the zones exposed to contact with sharp edges or tools.

Particular emphasis was placed on protecting sensitive areas. The high stand-up collar is an integral part of the protective system, shielding the neck and throat area. Its construction ensures close contact with the body without excessive pressure, so it does not restrict freedom of movement or breathing comfort.

The jacket provides a high level of protection against cuts, meeting the requirements of European standards for protective clothing. The materials used and the construction provide effective protection against sharp tools and mechanical hazards:

• cut protection level 5 according to EN 388:2016 - the highest level of resistance to mechanical cuts on a 0-5 scale
• cut protection level D according to EN ISO 13997:1999 - high resistance to cuts from sharp tools at a specified applied force (scale from the lowest A to the highest F)
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 - meets the requirements for protective clothing and is marked with the CE mark

The Oldenburg model has been classified as category II personal protective equipment (PPE II), which means it is intended to protect against hazards with a medium level of risk. Products in this category are subject to mandatory conformity assessment and EU type examination carried out by a notified body.

The model is equipped with 3 pockets:

• 1 chest pocket
• 2 side pockets

The use of zips increases the security of carried items, and the thoughtful pocket layout makes it easier to organise equipment conveniently.

The jacket is fastened along its full length with a durable zip, allowing for quick and convenient putting on and taking off. The model features a relaxed fit that does not restrict range of movement and allows comfortable use also during dynamic work.

The manufacturer recommends washing at 30 degrees Celsius, in a protective bag, separately, without using a tumble dryer and without turning the product inside out.

• cut-resistant jacket
• full-surface protective layer without uncovered areas
• high stand-up collar protecting the neck and throat
• cut-resistant material: Aramid (50%), polyester (33%), fibreglass (17%)
• outer layer of wind- and moisture-resistant material
• high mechanical resistance while maintaining low weight and flexibility
• protection level 5 according to EN 388:2016
• protection level D according to EN ISO 13997:1999
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 (CE marking)
• relaxed fit ensuring full mobility and comfort
• full-length zip
• 3 practical pockets