Universal, durable gloves designed to provide basic mechanical protection. Their optimal fit ensures full grip control, allowing you to perform precise tasks without restrictions. Ideal for uniformed services, military personnel, shooting sports enthusiasts, as well as for survival expeditions, car workshop tasks, DIY projects, and ASG games.
The outer layer of the gloves is made of lightweight, breathable CoolPlus fabric, which reduces perspiration and promotes air circulation. The one-piece fabric construction minimises the number of seams, resulting in greater durability, while the mesh material is tear and snag resistant. The inner part is made of 0.8 mm thick synthetic leather, which guarantees a secure grip and precise feel, while allowing you to use touch screens without having to remove your gloves. The roll-up Lock Ring panel reinforces the critical area around the thumb, improving the durability of the glove while reducing the number of seams that are particularly vulnerable to damage.
The gloves are equipped with a sturdy fastening made of TPR (Thermoplastic Rubber – thermoplastic rubber compliant with EN 13594) with Velcro. The two-piece palm construction and stitched Freedom-Flex cuff prevent the material from creasing and ensure a very good fit and freedom of movement. Additional ventilated lining in the lower part of the palm improves air flow and provides protection against injuries.
The gloves meet the American protective standard ANSI/ISEA 105 at level 3XX in terms of resistance to cutting, abrasion, and puncture, which means:
- 3: abrasion resistance (on a scale from 1 to 6)
- X: cut resistance (on a scale from A1 to A9)
- X: puncture resistance (on a scale from 0 to 5)
The gloves meet the protective standard EN388 at level 2121X in terms of resistance to mechanical risks, which means:
- 2: abrasion resistance (on a scale of 0–4)
- 1: cut resistance (on a scale of 0–5)
- 2: tear resistance (on a scale of 0–4)
- 1: puncture resistance (on a scale of 0–4)
- X: cut resistance – TDM test (ISO 13997) (on a scale of A–F)
In the ANSI/ISEA 105 standard, abrasion resistance is rated on a scale from 1 to 6 and refers to the number of cycles a material can withstand before wearing out. Cut resistance is classified on a scale from A1 to A9 (from the lowest to the highest level of protection). Puncture resistance is rated on a scale from 0 to 5 and indicates the force required to puncture the glove surface with a sharp probe (does not apply to needle puncture).
The scales specified in the EN388 standard define the level of glove protection: a value of 0 indicates no protection, while the highest values (4, 5) indicate the maximum level of resistance.
When testing using the TDM method (ISO 13997), letter markings are used, where A indicates the lowest level of protection and F the highest.
The X marking indicates that the given parameter was not tested or is not applicable.
