or sign up for availability notification
Jackery Explorer 500 V2 Power Station
Portable power station with a 512 Wh LiFePO4 rechargeable battery, designed for outdoor use and emergency power for household devices. The AC outputs provide a combined rated power of 500 W, while 6 outputs let you connect devices powered through mains sockets, USB ports and a car socket. Its 5.7 kg weight and folding handle make it easier to carry, while charging from the mains, a vehicle or solar panels lets you replenish power during trips.
512 Wh LiFePO4 rechargeable battery
The station has a 512 Wh LiFePO4 rechargeable battery, equivalent to 20 Ah at 25.6 V. After 6000 charge cycles, the cells retain at least 70% of their capacity. With daily charging, that cycle count corresponds to about 16 years of use, while the estimated lifespan of up to 30 years assumes charging every other day. The device is designed for charging and discharging at temperatures from -20 to +45 degrees Celsius. Its AC output maintains stable voltage and full power even in low temperatures, making it easier to use equipment in winter. The design does not allow the capacity to be expanded by connecting additional battery modules.
CTB technology and folding handle
The CTB (Cell-to-Body) technology integrates the inverter and PV circuitry with cells housed in the base of the device. This enables a more compact design and 18% more efficient use of space compared with the previous Explorer 500 version. The housing is flame-retardant and resistant to heat and impacts. The station has a weight of 5.7 kg and dimensions of 31.1 x 20.5 x 15.7 cm. Its volume is 27% smaller than the average volume of popular 0.5 kWh-class stations included in the product comparison. The folding handle with a 90-degree range of motion makes one-handed carrying easier and reduces the space needed during transport.
500 W of power and 6 outputs
Two AC sockets provide a combined rated power of 500 W and peak power of 1000 W. Pure sine wave output and regulated output voltage allow compatible electronic devices to be powered. The station offers 6 outputs:
- 2 AC sockets - 230 V, 50 Hz, 2.18 A
- USB-C1 port with up to 100 W of power - 5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 5 A
- USB-C2 port with up to 30 W of power - 5 V / 3 A, 9 V / 3 A, 12 V / 2.5 A, 15 V / 2 A, 20 V / 1.5 A
- USB-A port with up to 18 W of power - 5-6 V / 3 A, 6-9 V / 2 A, 9-12 V / 1.5 A
- Car socket - 12 V / max. 10 A
In bypass mode, the AC output operates at 230 V, 50 Hz and 500 W. The rated power determines which devices can be supported - equipment requiring higher continuous power, such as a 1500 W kettle, exceeds the station's capabilities.
Mains, vehicle and solar charging
Power can be replenished from the AC mains, a vehicle's 12 V electrical system, solar panels or the mains and a panel simultaneously. The mains input supports 220-240 V, 50 Hz and current up to 10 A. Charging time from 0 to 100% varies by source:
- Simultaneous charging from the AC mains and a SolarSaga 100 W panel - 1 h
- Charging from the AC mains - 1.3 h
- Charging from 1 SolarSaga 100 W panel - 6.8 h
- Charging from 2 SolarSaga 100 W panels - 3.4 h
- Charging from a vehicle's 12 V electrical system - 6 h
The stated times were measured under laboratory conditions. Actual charging time depends on factors including sunlight, temperature, power supply stability and how the device is used.
Solar Priority feature and DC8020 input
The station has a DC8020 input with a maximum power of 200 W. The input supports 11-16 V and current up to 8 A as well as 16-60 V and current up to 10.5 A, subject to the input power limit. This allows a compatible DC power source to be connected.
The Solar Priority feature prioritises solar power when panels and the mains are connected at the same time. Mains power supplements charging as needed. Simultaneous charging from solar panels and a vehicle's electrical system is not possible.
UPS with switching in under 10 ms
The UPS feature automatically switches connected devices to power from the station when mains power fails. Switching in under 10 ms enables emergency power for compatible devices such as a router or lighting. Switching does not occur in 0 ms. Do not connect equipment requiring completely uninterrupted power, such as data servers and workstations. Before use, compatibility with the connected device should be checked several times; powering one device at a time is recommended to reduce the risk of triggering overload protection.
ChargeShield 2.0 and BMS system
ChargeShield 2.0 technology uses AI to optimise charging and helps protect the device even when charging at temperatures up to 45 degrees Celsius. A 12-layer BMS battery management system and surge protection up to 3000 V improve the safety of connected devices.
Energy saving and LED lighting
The Energy Saving Mode, activated with one button, reduces power consumption by unused outputs. After 6 h of inactivity or operation under a light load, the mode automatically turns off the outputs - when power draw is below 25 W for AC and below 2 W for USB and the car socket. Built-in LED lighting illuminates the immediate surroundings at a campsite or during a power cut. There are 2 modes: standard lighting and SOS for signalling in emergencies.
Runtime and number of charges
Energy stored in the battery can power and charge a range of devices. Example results for the listed devices:
- 5 W camping light - 38 h of operation
- 60 W portable fridge - 4.5 h of operation
- 160 W ice maker - 3 h of operation
- 300 W kettle - 12 uses
- Phone with a 4352 mAh rechargeable battery - 17 charges
- Action camera with a 1720 mAh rechargeable battery - 64 charges
- 10 W speakers - 28 h of operation
- 625 Wh electric bike battery - 0.8 full charges
- 5 W head torch - 38 h of operation
- 8.4 W camera - 21 charges
- Drone with a 28.4 Wh rechargeable battery - 9 charges
- 10 W Wi-Fi router - 30 h of operation
- 20 W tablet - 8 charges
- 20-60 W NAS - 6-15 h of operation
- 80 W laptop - 4 charges
The figures come from laboratory tests and are approximate. Actual results depend on the specifications of connected devices, how they are used and operating conditions.
Package contents
- Jackery Explorer 500 v2 power station
- AC mains charging cable
- user manual
Main features
- 512 Wh LiFePO4 rechargeable battery
- 6000 cycles with at least 70% capacity retained
- combined AC rated power of 500 W
- AC peak power of 1000 W
- pure sine wave AC output
- 2 AC sockets at 230 V
- 100 W and 30 W USB-C ports
- 18 W USB-A port
- 12 V / 10 A car socket
- charging from the mains, a vehicle and solar panels
- simultaneous AC and SolarSaga 100 W charging in 1 h
- DC8020 input with up to 200 W of power
- Solar Priority feature
- UPS with a switching time under 10 ms
- CTB technology
- ChargeShield 2.0 technology
- 12-layer BMS system
- surge protection up to 3000 V
- energy-saving mode
- LED lighting with SOS mode
- charging and discharging from -20 to +45 degrees Celsius
- folding carrying handle
- weight 5.7 kg
- dimensions 31.1 x 20.5 x 15.7 cm
| Weight | 5,7 kg |
|---|---|
| Capacity | 512 Wh |
| Color | Black |
| Output power | 500 W |
| Main color | Black |
| Dimensions | 31.1 × 20.5 × 15.7 cm |
| Rechargeable battery/battery type | LiFePO4 |
| EAN | 6958657301176 |
| Manufacturer code | 21-0001-000275 |
| Brand | Jackery |
| EAN |