Brunnirok Oldenburg Cut-Resistant Jacket - Black

The black cut-resistant jacket was developed as specialized protective clothing intended for people exposed to contact with sharp tools or edges - both at work and during selected outdoor activities. It performs well during technical and service work, as well as anywhere there is a risk of accidental cutting of the fabric and blade contact with the body.

The construction is based on an advanced cut-resistant material, which combines high mechanical resistance with relatively low weight. The model was designed to provide the highest possible level of protection for critical areas of the upper body, including the neck area. The jacket has been classified as category II personal protective equipment (PPE category II).

The inner layer of the jacket is made of an advanced fiber blend:

• Aramid (50%) - provides very high mechanical resistance and cut resistance, forming the primary protective component
• polyester (33%) - stabilizes the material structure, increases its durability during use, and improves resistance to stretching and deformation
• glass fiber (17%) - serves a reinforcing role - high hardness and resistance to blade action make it more difficult to penetrate the material, creating an additional protective barrier

This combination made it possible to achieve a material with high cut resistance while maintaining low thickness and good flexibility. The outer layer of the jacket is made of a blend of polyester (96%) and elastane (4%). Polyester is responsible for the increased durability of the fabric, while elastane improves its stretchability, resulting in a better fit and freedom of movement.

The outer material offers windproof properties and moisture resistance, helping limit the penetration of light precipitation and protecting against cooling caused by wind. The outer layer creates an additional protective barrier, complementing the cut-resistant properties of the entire construction.

Every zone of the jacket is lined with cut-resistant material, ensuring continuous protective coverage across the entire surface. This solution eliminates local weak points in the construction, so protection is not limited only to selected panels, but covers all zones exposed to contact with sharp edges or tools.

Special emphasis was placed on protecting sensitive areas. The high stand-up collar is an integral element of the protective system, shielding the neck and throat area. Its construction ensures close contact with the body without excessive pressure, so it does not restrict freedom of movement or breathing comfort.

The jacket provides a high level of cut protection, meeting the requirements of European standards for protective clothing. The materials used and the construction ensure effective protection against sharp tools and mechanical hazards:

• cut protection level 5 according to EN 388:2016 - the highest level of resistance to mechanical cuts on a 0-5 scale
• cut protection level D according to EN ISO 13997:1999 - high resistance to cuts from sharp tools at a specified pressure force (scale from the lowest A to the highest F)
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 - meets the requirements for protective clothing and is marked with the CE symbol

The Oldenburg model has been classified as category II personal protective equipment (PPE II), which means it is intended to protect against medium-risk hazards. Products in this category are subject to mandatory conformity assessment and EU type examination carried out by a notified body.

The model is equipped with 3 pockets:

• 1 chest pocket
• 2 side pockets

The use of zippers increases the security of carried items, while the thoughtfully arranged pockets make it easier to organize equipment conveniently.

The jacket is fastened along its full length with a durable zipper, allowing quick and convenient putting on and taking off. The model stands out with its relaxed fit, which does not restrict range of motion and allows comfortable use, also during dynamic work.

The manufacturer recommends washing at a maximum temperature of 30 degrees Celsius, without the use of bleach, and separately in a protective bag. Do not tumble dry or expose to direct sunlight. Ironing is permitted at temperatures up to 110 degrees Celsius. Dry clean only with tetrachloroethylene solvents.

• cut-resistant jacket
• full-surface protective layer with no exposed zones
• high stand-up collar protecting the neck and throat
• cut-resistant material: Aramid (50%), polyester (33%), glass fiber (17%)
• outer layer of wind- and moisture-resistant material
• high mechanical resistance while maintaining low weight and flexibility
• protection level 5 according to EN 388:2016
• protection level D according to EN ISO 13997:1999
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 (CE marking)
• relaxed fit ensuring full mobility and comfort
• full-length zipper
• 3 practical pockets