Rutus Versa DD28 Metal Detector

Metal detector featuring a waterproof and black multi-frequency DD coil (28 cm), incorporates Multi Frequency technology that enhances the detector's performance on wet and conductive terrains, such as beaches, and in soils with high magnetite content. A key benefit is its compact design achieved through the use of a round cross-section lower shaft.

Supported operating frequencies: Offers multi-frequency or a single frequency adjustable between 4 and 40 kHz, with adjustments in increments of 0.2 kHz up to 14.2 kHz, and increments of 0.6 kHz above 14.8 kHz.

• beach - program featuring only a dynamic mode with Multi Frequency
• beach dual - program designed for detecting in conductive soil and among non-metallic conductive debris (coke, shale), operating simultaneously (static + dynamic) exclusively in Multi Frequency
• field - program tailored for the deepest object detection irrespective of soil type
• field dual - program in simultaneous mode, optimized for deepest object detection regardless of soil type
• park - program designed for use in debris-filled areas, prioritizing low masking and efficient identification of steel waste
• park dual - program in simultaneous mode, optimized for operation in littered areas, with a focus on low masking and effective steel waste identification
• static with discrimination and tone identification - program for conducting deep searches for the largest objects
• my 1-4 - 4 user-definable programs

Multi-Frequency mode provides the greatest versatility, with the detector automatically utilizing the complete frequency range, thereby broadening the spectrum of potential discoveries.

• Rutus Versa DD28 metal detector
• multi-frequency black DD 28 cm coil
• charging cable
• 3.5 mm audio cable
• integrated probe cover
• speaker cover
• silicone plug for charging/audio socket
• plastic cap for charging/audio socket for use in water
• user manual

• frequencies: Multi-frequency or a single frequency adjustable between 4 and 40 kHz, with increments of 0.2 kHz up to 14.2 kHz, and 0.6 kHz above 14.8 kHz.
• EMI disturbance preview
• automatic ground tuning
• sensitivity - 30 levels
• digital identification - 120 points (iron range: -29 to 0, color range: 0 to 90)
• classic discrimination - 120 points
• selective discrimination - 120 points
• reaction speed - 8 levels
• leading signal level
• leading signal tone
• iron volume
• SAT - 20 levels
• VCO permanently turned on (variable tone from static channel in Dual programs)
• multi-filter always active in Pole and Pole Dual programs
• number of tones - modulated (Pitch); 1, 2, 3, 6 tones; 3 user profiles (up to 120 points); tone range from 60 to 999 Hz
• volume - 30 levels
• backlighting - 21 levels
• pinpoint with depth measurement for coins
• 7 factory programs and 4 user-defined programs
• updates and software changes via WiFi
• built-in battery - runs from 10 to 25 hours depending on frequency and speaker or headphone use, averaging 15 hours
• charging time - approximately 7 hours
• compatible with SR-1 wireless headphones and OS-2 receiver

Frequency: Multi or single frequency options adjustable between 4 and 40 kHz
Power supply: Integrated battery
Default modes: 7 plus Pinpoint
Water resistance: Up to 2.5 meters
Sensitivity: 30 adjustable levels
Classic discrimination: 120 points
Selective discrimination: 120 points
Coil: 28 cm DD
Folded length: 60/69 cm
Unfolded length: 134 cm
Total weight: 1330 grams
Manufacturer: Rutus, Poland